The Hamba Flexline filling and sealing machine is the ultimate answer for ultra-clean and aseptic processing.
The Hamba Flexline filling and sealing machine is the ultimate answer for ultra-clean and aseptic processing.
With a completely enclosed processing tunnel with sterile air overpressure, the Hamba Flexline filling and sealing machine is the ultimate answer for ultra-clean and aseptic processing thanks to packaging material sterilisation and safe germ reduction.
The machine completes the process thanks to a conveyor inside an enclosed tunnel with sterile air overpressure.
Products filled under aseptic conditions have, even outside the cold chain, a considerably longer shelf-life than fresh products. They are equally good tasting and do not deteriorate. Without the need for refrigeration, distribution costs are vastly reduced.
TECHNICAL DATA HAMBA FLEXLINE | ||||
MODEL | CUPS PER CYCLE | ROUND ( Ø max.) | HEIGHT (max.) | NOMINAL OUTPUT |
1-4 | 4 | 180 mm | 150 mm | up to 9.600 cups/h |
1-6 | 6 | 130 mm | 150 mm | up to 14.400 cups/h |
1-8 | 8 | 105 mm | 150 mm | up to 19.200 cups/h |
1-10 | 10 | 95 mm | 150 mm | up to 24.000 cups/h |
1-12 | 12 | 75 mm | 150 mm | up to 28.800 cups/h |
2-6 | 12 | 95 mm | 150 mm | up to 28.800 cups/h |
2-8 | 16 | 95 mm | 150 mm | up to 38.400 cups/ |
2-10 | 20 | 95 mm | 150 mm | up to 48.000 cups/h |
2-12 | 24 | 75 mm | 150 mm | up to 57.600 cups/h |
Square and rectangular cups (tubs) can also be handled) | ||||
TYPICAL MATERIALS | ||||
Cups | Pre-made cups made of Paper, PET, PP, PS, K3 or compound materials* | |||
Lids | Pre-cut lids made of aluminium foil or made of PET or PP* | |||
Snap-on lids | Pre-made snap-on lids made of PET, PP, PS or filled snap-on-lids* | |||
* other material combinations on request | ||||
STANDARD EQUIPMENT | ||||
Cup feed and decontamination | Cup-destacker and insertion, cup control, cup decontamination by means of H2O2, cup lifting and ejecting onto discharge conveyor (alternatively an integrated packer can be installed) | |||
Filler | Free space for pre-filler, main filler (CIP, SIP, nozzles, level controls) | |||
Lid | Lid applicator with decontamination by means of H2O2 | |||
Others | Leakage test, free space for coding | |||
Hygiene class | Ultra-clean | |||
OPTIONS | ||||
Hygiene class | Aseptic | |||
Filler | Pre-filler, pre- and post-filler, side-by-side filling, twisted filling, spot filling, flow meter filling | |||
Control system | ALLEN BRADLEY | |||
Others | Cup stack buffer magazine or different feeding devices, particle removal, sealing and die cutting from roll stock, coding, snap-on lid feeding system, end-of-line equipment |